How to repair air valve when the  the spring button fails to close? -  Supzoom Paddle Board Manual

How to repair air valve when the the spring button fails to close? - Supzoom Paddle Board Manual

Step 1. First, you need to deflate the inflatable paddle. Next, Remove the repair kit from the accessories kit and then remove the wrench.

Step 2. Press the air valve spring button continuously to check whether the bottom of the air valve cannot be reset. If it can't be reset, it can be determined it is caused by the deviation of the position of the air valve core.

Step 3. Clamp-on the core base with a suitable clip and clamp the core base back to its original position. Press the air valve spring button again to check whether the bottom of the air valve core is reset. If it has been reset, it has been repaired.

Step 4. Check the white spring button in the middle of the air valve. if it pops up, it is inflated; Otherwise, it is deflated. Press the button to make sure it pops up. Connect the pump tube to the air valve, and fasten it clockwise.

Step 5. Inflate the sup board to 10PSI and then use the foam water to check again and see if there is air leakage. If there are no obvious bubbles, it has been repaired.

 

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.