How to repair the air leakage due to loose air valve? - Supzoom Paddle Board Manual

How to repair the air leakage due to loose air valve? - Supzoom Paddle Board Manual

Step 1. First, you need to deflate the inflatable paddle. Next, Remove the repair kit from the accessories kit and then remove the wrench.

Step 2. Fix the wrench at the correct position of the air valve and fasten the air valve clockwise.

Step 3. Check the white spring button in the middle of the air valve, if it pops up, it is inflated; otherwise, it is deflated. Press the button to make sure it pops up. Connect the pump tube to the air valve, and fasten it clockwise. Next, Connect the pump tube to the air valve and fasten it clockwise. Finally, inflate the sup board to 10PSI.

Step 4. Use the foam water to check again and see if there is air leakage. If there are no obvious bubbles, it has been repaired.

 

 

Read More:

How to replace the damaged air valve?

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.