Manuels d'utilisation

Step 1. Open the turnbuckle and tighten it clockwise. Step 2. Adjust the height properly again and then lock the turnbuckle.   Read More: How to install the fishing rob holder? How to assemble your paddle?

Step 1. Firstly, open the cap of the air valve. And then press the white spring button to deflate. Step 2. Take the hand pump and pump tube out of the accessories bag and then Connect the tube to the...

Step 1. First, you need to deflate the inflatable paddle. Next, Remove the repair kit from the accessories kit and then remove the wrench. Step 2. Fix the wrench at the correct position of the air valve and fasten the...

Step 1. First, you need to deflate the inflatable paddle. Next, Remove the repair kit from the accessories kit and then remove the wrench. Step 2. Fix the wrench at the correct position of the air valve, and loosen the...

Step 1. First, you need to deflate the inflatable paddle. Next, Remove the repair kit from the accessories kit and then remove the wrench. Step 2. Press the air valve spring button continuously to check whether the bottom of the...

Step 1. First of all, you need to have detergent or washing powder and stir it with water to make a foam. Step 2. Spray the foam water on the air valve, and continuously observe whether continuous bubbles are emerging....

Step 1. Firstly, open the cap of the air valve and press the white spring button to deflate. Step 2. Wind up the paddleboard from the other end which doesn't have the air valve. Step 3. Fasten the air valve...